Skip to content

Fuel Cost Calculator

Estimate the fuel needed and cost of a road journey using either UK miles per imperial gallon or litres per 100 kilometres. Enter the total trip distance, consumption figure, pump price and number of people sharing.

UK MPG uses the imperial gallon of 4.54609 litres, not the smaller US gallon. Select litres per 100 km when both your route distance and consumption display are metric.

Last reviewed

Fuel Cost Calculator

Estimated journey fuel cost

£14.65

Fuel needed10.10 litres
Cost per person£14.65

Reading the result

Journey fuel cost covers fuel only. Fuel needed is the calculated litres for the full entered distance; cost per person divides that fuel bill equally by the number sharing.

Use total distance, so double a one-way route for a return trip. The answer is an estimate because real consumption can differ from a dashboard or official figure.

How it works

In UK MPG mode, imperial gallons used = miles ÷ MPG, then litres = gallons × 4.54609. In metric mode, litres = kilometres × litres per 100 km ÷ 100.

Cost = litres × price in pence per litre ÷ 100. The sharing result divides cost by the whole number entered; it does not add parking, tolls or other travel costs.

Worked examples

Return trip in UK MPG

Travel 90 miles each way in a car averaging 45 UK MPG, with fuel at 145p/litre.

  1. Enter 180 miles as total distance.
  2. 180 ÷ 45 = 4 imperial gallons.
  3. 4 × 4.54609 = 18.18436 litres; multiply by £1.45.

About £26.37 in fuel.

Metric trip shared

Travel 300 km at 6.5 litres/100 km, fuel 150p/litre, shared by three people.

  1. 300 × 6.5 ÷ 100 = 19.5 litres.
  2. 19.5 × £1.50 = £29.25.
  3. £29.25 ÷ 3 = £9.75.

£29.25 total fuel cost, or £9.75 each.

Assumptions

The result depends on the following. If any of them do not match your situation, treat the figure as indicative only.

  • Distance and consumption use the units named by the selected mode.
  • Fuel price is pence per litre and stays constant for the trip.
  • The entered consumption is treated as an average for the whole route.

What this calculator does not do

  • Traffic, speed, weather, gradients, load, tyre condition and driving style can change consumption.
  • Parking, tolls, wear, depreciation and electric charging are excluded.
  • Official or advertised fuel-consumption figures may not match an individual journey.

Methodology

The UK mode uses exactly 4.54609 litres per imperial gallon. It never uses the US liquid gallon. Metric mode applies the standard litres-per-100-kilometres relationship directly.

Currency conversion from pence to pounds happens after litres are calculated. The split is a simple equal division and does not decide what a fair contribution should be.

Check 45 miles at 45 UK MPG and £1 per litre: that is one imperial gallon, 4.54609 litres and £4.54609.

Sources

Improving the estimate

Use a recent real-world consumption figure from similar driving rather than assuming the best displayed figure. Include detours and local travel in total distance.

Official consumption figures

Standardised figures help compare vehicles, but an individual trip can differ.

Vehicle Certification Agency: fuel cost guidance

Frequently asked questions

Does MPG mean UK or US gallons?

UK imperial gallons. One imperial gallon is 4.54609 litres.

Should I enter one-way or return distance?

Enter the total distance you expect to drive. Double the one-way distance for a return on the same route.

How do I use litres per 100 km?

Select metric mode, enter distance in kilometres and the vehicle’s litres/100 km figure.

Why can actual fuel cost differ?

Traffic, weather, speed, load and driving style all affect consumption, while pump price can change.

Does cost per person include parking or tolls?

No. It divides fuel cost only.

Please note: Results are estimates for general information only and are not financial, tax or legal advice. Figures depend on the assumptions listed on each page and on your personal circumstances.

Browse the full UK calculator directory